Difference Between Transmission and Distribution

Main Difference

Transmission and distribution are terms referred to power systems. Both these terms differ greatly in their implementation. An electrical power distribution supply system is normally the ultimate and final phase in the supply of electrical power; this provides electrical power from your transmitting cables to private buyers. Distribution substations interact with the actual transmitting system reduce the transmitting voltage to moderate voltage varying in between Two kV and Thirty-five kV by using transformers. Electrical power transmission would be the majority transport of the electrical power, coming from creating energy plants to electric powered substations positioned close to demand facilities. This really is dissimilar to any local cabling in between high-voltage substations and consumers, which can be usually known as electric power distribution. Transmission lines, whenever connected with one another, turn out to be transmitting systems.

What is Transmission?

The basic concept of transmission is the movement of energy from one place to another. Using the extensive, widespread facility associated with electric powered plants and grids power transmitting is normally connected the majority of electrical power transmission. Alternating electric current is generally desired because its voltage can be easily increased by the transformer so that you can reduce resistive loss within the conductors accustomed to transfer power through terrific miles. Electrical energy is normally produced from diverse producing stations. These types of power-producing channels are not specifically located around the load center. In the course of development of generating station quantity of factors that need considering from affordable perspective. All of these aspects might not be readily available at load center, hence producing stations will not be generally located very closer to the load center. Load center is the point where highest electrical power is absorbed. Consequently, there should be a number of methods through which the generated electrical power have to be transmitted to the load center. Electrical transmitting strategy is the method of transferring power coming from producing station to various load centers.

What is Distribution?

As the distribution of the electrical power is the final stage after transmission of power. Basic distribution lines hold the moderate voltage power to distribution transformers positioned close to the consumer’s location. Distribution transformers yet again reduce the voltage towards the usage voltage associated with home equipment and frequently feed a number of consumers as a result of supplementary distribution lines around this voltage. Residential and commercial clients are attached to the supplementary distribution lines by assistance drops. Consumers requiring a substantially bigger quantity of power could possibly be attached straight to the main distribution level or even the sub-transmission level. Distribution of electrical power is completed simply by distribution systems. Primary power is mostly stepped down in the substations to fed to the household consumers. Distribution systems contain subsequent principal segments:

  • Distribution substation,
  • Primary distribution feeder,
  • Distribution Transformer,
  • Distributors,
  • Service mains

Key Differences

  1. Transmission is usually done in the three phases while distribution is done in the single phase
  2. Transmission lines are for large distances and distribution lines are for short distances
  3. Transmission lines have higher voltage while distribution lines have lower voltage
  4. Transmission lines transport the bulk of electricity while distribution lines transport energy locally according to the needs of the local consumers
  5. Transmission lines can be viewed on the side of the freeway whereas distribution lines in the streets
  6. Transmission system voltages are typically from 69KV up to 765KV whereas Distribution systems typically operate in a voltage range of 4KV to 46KV.
  7. Transmission conductors are usually large whereas distribution conductors are usually small
  8. After transmission step down transformer is used while in distribution it is not used
  9. Transmission lines, which may be strung overhead or even subway, hold electric power via one particular place to another within an electrical power system whereas A distribution system comes with only a distribution substation and also consists of the lines, poles, transformers.
Harlon Moss

Harlon currently works as a quality moderator and content writer for Difference Wiki. He graduated from the University of California in 2010 with a degree in Computer Science. Follow him on Twitter @HarlonMoss

View all posts by Harlon Moss